Brownells Slovensko - Svetovo najväčší dodávateľ súčastí zbraní, zbrojného vybavenia a príslušenstva Slovenská republika

SAECO LEAD HARDNESS TESTER


Saeco Lead Hardness Tester

The SAECO Lead Hardness Tester lets you positively identify the hardness of your cast lead bullets, verifying they’re safe to shoot and won’t damage your valuable firearm. You can cast bullets from scrap lead and check their hardness so you can shoot them with complete confidence. Viac...

Produkt č.: 749012736 611760420009 749012736
The SAECO Lead Hardness Tester lets you positively identify the hardness of your cast lead bullets, verifying they’re safe to shoot and won’t damage your valuable firearm. You can cast bullets from scrap lead and check their hardness so you can shoot them with complete confidence. Or check the hardness of your black powder cast bullets to ensure proper seating in the rifling and consistent accuracy for BPCR competition. Just insert the bullet into the aluminum housing, turn the hardened steel indenter until it stops, then read the depth of penetration off the vernier scale to determine the hardness. The tester is calibrated from 0 to 10 using the SAECO scale. A hardness of at least 6 is required for medium velocities in handguns, while a reading of over 8 works best for magnum handgun bullets or gas-checked rifle bullets. (For reference, wheel weights usually test between 7 and 9, and linotype normally reads a 10.) An indispensable tool for anybody serious about bullet casting.
SAECO
236 236 1 EUR
749012736
Saeco Lead Hardness Tester
Časť - Výrobcovia: 42000 611760420009 SAECO viesť tvrdosť Tester umožňuje identifikovali tvrdosť vašej cast olovené guľky, overovanie sú bezpečné, strieľať a nepoškodí vaše cenné strelnej zbrane. Môžete vrhajú guľky zo šrotu viesť a kontrolovať ich tvrdosť, takže môžete fotografovať s úplnou dôverou. Alebo tvrdosť vašej čierny prach cast guľky na zabezpečenie správneho sedenia v loupení a konzistentné presnosť BPCR súťaže. Stačí vložiť náboj do hliníkový kryt, zase kalené oceľové indenter až na doraz, potom si prečítajte hĺbka prieniku off vernier stupnice na určenie tvrdosti. Tester je kalibrovaný od 0 do 10 pomocou stupnice SAECO. Tvrdosť aspoň 6 je potrebné pre stredné rýchlosti v zbrane, pri čítaní viac ako 8 funguje najlepšie magnum zbraň odrážok alebo plyn-kontrolované puška guľky. (Pre odkaz, závažiami na kolesách zvyčajne test medzi 7 a 9, a linotype normálne číta 10.) Nepostrádateľný nástroj pre niekto vážne guľka casting.
236 EUR 3 236,00 € *

Skladom 3 ks v USA
Doba dodania 14 - 28 dní

Podrobnosti o položke

Made in USA
ECCN: EAR99




The SAECO Lead Hardness Tester lets you positively identify the hardness of your cast lead bullets, verifying they’re safe to shoot and won’t damage your valuable firearm. You can cast bullets from scrap lead and check their hardness so you can shoot them with complete confidence. Or check the hardness of your black powder cast bullets to ensure proper seating in the rifling and consistent accuracy for BPCR competition. Just insert the bullet into the aluminum housing, turn the hardened steel indenter until it stops, then read the depth of penetration off the vernier scale to determine the hardness. The tester is calibrated from 0 to 10 using the SAECO scale. A hardness of at least 6 is required for medium velocities in handguns, while a reading of over 8 works best for magnum handgun bullets or gas-checked rifle bullets. (For reference, wheel weights usually test between 7 and 9, and linotype normally reads a 10.) An indispensable tool for anybody serious about bullet casting.