Brownells Slovensko - Svetovo najväčší dodávateľ súčastí zbraní, zbrojného vybavenia a príslušenstva Slovenská republika

POWER CUSTOM RUGER® 10/22® PRE-TRAVEL ADJUSTABLE HAMMER & SEAR KIT


Pre-Travel Adjustable 10/22® Hammer & Sear Kit

Easy-to-install kit replaces factory parts to eliminate trigger pre-travel and roughness for a clean, crisp, custom pull with little or no gunsmithing. Adjust the setscrew in the sear with the included Allen wrench to take up pre-travel, then lock screw in place with your favorite thread locking adhesive. Viac...

Produkt č.: 713000071 713000071
Eliminates Pre-Travel For A Clean, Crisp-Trigger Pull
Easy-to-install kit replaces factory parts to eliminate trigger pre-travel and roughness for a clean, crisp, custom pull with little or no gunsmithing. Adjust the setscrew in the sear with the included Allen wrench to take up pre-travel, then lock screw in place with your favorite thread locking adhesive. Sear and hammer geometry is custom designed to produce a lighter pull and a smoother trigger return. EDM machined from A2 tool steel and heat treated to Rc 56-58, with precision-ground engagement surfaces vapor honed for smoothness. Some guns may require minor fitting for correct engagement of safety, described in the detailed instructions. Hammer/sear sets are produced as matched pairs with 2¾ lb. pull weight plus or minus 4 oz. Shims are precision manufactured from .004” thick 302 stainless steel and tempered for superior wear resistance. Use them to center trigger and sear for additional smoothness and consistency of pull and cleaner break by minimizing friction between the sear and the inside of the trigger. Kits DO NOT fit 10/22® Magnum. Sear Kit is compatible with factory original and aftermarket hammers with the correct engagement angle for drop-in installation; minor fitting may be required on some guns.

SPECS: Steel, in-the-white. Sear Kit – Includes sear, disconnector/sear spring, 2 sear shims, trigger pivot pin, cheater pin. Hammer & Sear Kit – Includes Sear Kit contents plus extra-power hammer spring, 2 hammer shims, replacement trigger return spring. Complete installation instructions included. Kits DO NOT fit 10/22® Magnum.

POWER CUSTOM
58 117 2 EUR
713000071
Pre-Travel Adjustable 10/22® Hammer & Sear Kit
Časť - Výrobcovia: 1022PHS Pre-Travel nastaviteľná 10/22 kladivo & sežehnout Kit
117 EUR 3 117,00 € *

Skladom 3 ks v USA
Doba dodania 14 - 28 dní
Špecifikácia: Make: Ruger Model: 10/22

Obmedzenia

  • Platia vývozné obmedzenia USA Vyhlásenie o kontrole do destinácie: "Tieto položky sú kontrolované vládou Spojených štátov a sú povolené na vývoz iba do krajiny konečného určenia na použitie konečným príjemcom alebo konečným užívateľom (uživateľmi), ktorí sú tu identifikovaní. Nesmú byť ďalej predané, prepravené ani inak zlikvidované v žiadnej inej krajine alebo inej osobe, než je oprávnený konečný príjemca alebo koncový užívateľ, a to buď v ich pôvodnej forme alebo po začlenení do iných položiek, bez toho, aby najprv získali súhlas od vlády USA alebo boli inak povolené zákonmi a predpismi USA."



    This item is controlled by the U.S. government and authorized for export only to the country of ultimate destination for use by the ultimate consignee or end-user(s) herein identified. It may not be resold, transferred, or otherwise disposed of, to any other country or to any person other than the authorized ultimate consignee or end-user(s), either in their original form or after being incorporated into other items, without first obtaining approval from the U.S. government or as otherwise authorized by U.S. law and regulations.

Atribúty

Model: 10/22 Značka: Ruger

Podrobnosti o položke

Made in USA
ECCN: I(h)




713000070
Pre-Travel Adjustable 10/22® Sear Kit
Časť - Výrobcovia: 1022PS Pred príchodom nastaviteľná 10/22 sežehnout Kit
58 EUR 1 58,00 € *

Skladom 1 ks v USA
Doba dodania 14 - 28 dní
Špecifikácia: Make: Ruger Model: 10/22
Eliminates Pre-Travel For A Clean, Crisp-Trigger Pull
Easy-to-install kit replaces factory parts to eliminate trigger pre-travel and roughness for a clean, crisp, custom pull with little or no gunsmithing. Adjust the setscrew in the sear with the included Allen wrench to take up pre-travel, then lock screw in place with your favorite thread locking adhesive. Sear and hammer geometry is custom designed to produce a lighter pull and a smoother trigger return. EDM machined from A2 tool steel and heat treated to Rc 56-58, with precision-ground engagement surfaces vapor honed for smoothness. Some guns may require minor fitting for correct engagement of safety, described in the detailed instructions. Hammer/sear sets are produced as matched pairs with 2¾ lb. pull weight plus or minus 4 oz. Shims are precision manufactured from .004” thick 302 stainless steel and tempered for superior wear resistance. Use them to center trigger and sear for additional smoothness and consistency of pull and cleaner break by minimizing friction between the sear and the inside of the trigger. Kits DO NOT fit 10/22® Magnum. Sear Kit is compatible with factory original and aftermarket hammers with the correct engagement angle for drop-in installation; minor fitting may be required on some guns.

SPECS: Steel, in-the-white. Sear Kit – Includes sear, disconnector/sear spring, 2 sear shims, trigger pivot pin, cheater pin. Hammer & Sear Kit – Includes Sear Kit contents plus extra-power hammer spring, 2 hammer shims, replacement trigger return spring. Complete installation instructions included. Kits DO NOT fit 10/22® Magnum.

Skladom v USA Skladom 1 ks v USA
Doba dodania 14 - 28 dní
58,00 € * 58,00 € - 117,00 €*