Brownells Slovensko - Svetovo najväčší dodávateľ súčastí zbraní, zbrojného vybavenia a príslušenstva Slovenská republika

GUNCRAFTER 50 GI® CONVERSION SYSTEM for GLOCK®


50 GI Conversion System for Glock®

Drop-in conversion system replaces the top end of your Glock 20/21 pistol and converts it to fire the hard-hitting, yet controllable, 50 GI cartridge. Developed by Guncrafter, the 50 GI’s head is the same diameter as a . Viac...

Produkt č.: 100003756 100003756
Steps Up Large-Frame Glock Pistol To Powerful .50 Caliber cartridge
Drop-in conversion system replaces the top end of your Glock 20/21 pistol and converts it to fire the hard-hitting, yet controllable, 50 GI cartridge. Developed by Guncrafter, the 50 GI’s head is the same diameter as a .45 ACP, so the rest of your pistol remains stock, allowing easy conversion back to the original caliber. 50 GI ammo can be loaded to drive a 185 grain bullet at 1,200fps, with a felt recoil similar to 230 grain .45 ACP ball ammo. Delivers greater knock-down power, while remaining controllable during rapid fire. Conversion unit comes fully assembled with 4½" stainless steel barrel, firing pin, and guide rod with captive recoil spring. Slide and barrel are precision machined from stainless steel forgings to the same exacting tolerances as the original factory components. Non-reflective, matte finish is durable and good-looking. Black polymer fixed sights with easy to acquire white dot on front sight and U-shaped white outline around rear sight notch. The SF-style magazine uses a modified .45 ACP follower and has an extended base pad that allows it to hold 9 rounds; convenient witness holes at the rear. Fits standard mag pouches for .45 caliber Glock mags. Cut for SF-style magazine catch. Additional magazines available separately.

“GLOCK” is a federally registered trademark of Glock, Inc. and is one of many trademarks owned by Glock, Inc. or Glock Ges.m.b.H.  Brownells is an independent dealer of parts and accessories for Glock® pistols, and is not affiliated with or endorsed by Glock, Inc. or Glock Ges.m.b.H.  The use of Glock on this page is merely to advertise the sale of Glock parts or components.  As indicated in the product descriptions, not all parts and accessories on this site are official Glock products.

SPECS: Slide/Barrel Assembly - Stainless steel, matte finish. Magazine – Stainless steel liner, black polymer shell, base pad, and follower. 9-round capacity. May require some fitting of conversion unit’s locking lug and/or pistol’s locking block. Fits Glock 20/21 pistols only.

1160 1160 1 EUR
100003756
50 GI Conversion System for Glock®
Časť - Výrobcovia: GI2 Drop-in systém konverzie nahradí na hornom konci pištole Glock 20/21 a prevádza ho na oheň Hard-biť, ale kontrolovateľné, kazeta 50 GI. Vyvinutý Guncrafter, 50 GI hlava je rovnaký priemer ako.45 ACP, takže zvyšok pistoli zostáva skladom, umožňujúci jednoduchú konverziu späť na pôvodný ráže. 50 GI munície je možné načítať disk 185 obilia bullet 1, 200fps, s rázom podobná 230 zrna.45 ACP loptu munície. Prináša väčšiu silu knock-dole, zatiaľ čo zostávajúce kontrolovateľné počas rýchlej paľby. Konverzia jednotky sa dodáva kompletne zmontované s 4½" nerez hlaveň, úderník a Vodiaca tyč s zajatí vratnú pružinu. Slide a hlavne sú presne opracovanými z nerezovej ocele výkovky rovnaké náročné tolerancie ako pôvodné továrenské komponenty. Non-reflexné, matný povrch je odolný a dobre vyzerajúci. Čierna polymér stanovené pamiatok s ľahko získať biele bodky na mušky a U-formoval biely obrys okolo hľadia zárez. SF-style časopis používa upraveným nasledovníka.45 ACP a rozšírená základná podložka, ktorá umožňuje držať 9 kôl; pohodlné svedok otvory vzadu. Hodí štandardné mag sáčky pre.45 Magg Glock kaliber. Rez na SF-style časopis úlovok. Ďalšie časopisy sú k dispozícii samostatne.
1160 EUR 0 1 160,00 € *

Momentálne nie je skladom, tovar na objednanie.
Doba dodania (zvyčajne 5 - 8 týždňov)
Špecifikácia: Make: Glock Model: 21, 20

Obmedzenia

  • Platia vývozné obmedzenia USA Vyhlásenie o kontrole do destinácie: "Tieto položky sú kontrolované vládou Spojených štátov a sú povolené na vývoz iba do krajiny konečného určenia na použitie konečným príjemcom alebo konečným užívateľom (uživateľmi), ktorí sú tu identifikovaní. Nesmú byť ďalej predané, prepravené ani inak zlikvidované v žiadnej inej krajine alebo inej osobe, než je oprávnený konečný príjemca alebo koncový užívateľ, a to buď v ich pôvodnej forme alebo po začlenení do iných položiek, bez toho, aby najprv získali súhlas od vlády USA alebo boli inak povolené zákonmi a predpismi USA."



    This item is controlled by the U.S. government and authorized for export only to the country of ultimate destination for use by the ultimate consignee or end-user(s) herein identified. It may not be resold, transferred, or otherwise disposed of, to any other country or to any person other than the authorized ultimate consignee or end-user(s), either in their original form or after being incorporated into other items, without first obtaining approval from the U.S. government or as otherwise authorized by U.S. law and regulations.

Atribúty

Model: 20,21 Značka: Glock

Podrobnosti o položke

Made in USA
ECCN: I(g)




Steps Up Large-Frame Glock Pistol To Powerful .50 Caliber cartridge
Drop-in conversion system replaces the top end of your Glock 20/21 pistol and converts it to fire the hard-hitting, yet controllable, 50 GI cartridge. Developed by Guncrafter, the 50 GI’s head is the same diameter as a .45 ACP, so the rest of your pistol remains stock, allowing easy conversion back to the original caliber. 50 GI ammo can be loaded to drive a 185 grain bullet at 1,200fps, with a felt recoil similar to 230 grain .45 ACP ball ammo. Delivers greater knock-down power, while remaining controllable during rapid fire. Conversion unit comes fully assembled with 4½" stainless steel barrel, firing pin, and guide rod with captive recoil spring. Slide and barrel are precision machined from stainless steel forgings to the same exacting tolerances as the original factory components. Non-reflective, matte finish is durable and good-looking. Black polymer fixed sights with easy to acquire white dot on front sight and U-shaped white outline around rear sight notch. The SF-style magazine uses a modified .45 ACP follower and has an extended base pad that allows it to hold 9 rounds; convenient witness holes at the rear. Fits standard mag pouches for .45 caliber Glock mags. Cut for SF-style magazine catch. Additional magazines available separately.

“GLOCK” is a federally registered trademark of Glock, Inc. and is one of many trademarks owned by Glock, Inc. or Glock Ges.m.b.H.  Brownells is an independent dealer of parts and accessories for Glock® pistols, and is not affiliated with or endorsed by Glock, Inc. or Glock Ges.m.b.H.  The use of Glock on this page is merely to advertise the sale of Glock parts or components.  As indicated in the product descriptions, not all parts and accessories on this site are official Glock products.

SPECS: Slide/Barrel Assembly - Stainless steel, matte finish. Magazine – Stainless steel liner, black polymer shell, base pad, and follower. 9-round capacity. May require some fitting of conversion unit’s locking lug and/or pistol’s locking block. Fits Glock 20/21 pistols only.